Volvo Penta 120S, Workshop Manual

Page: 7 / 88

5
General instructions
General information
About the workshop manual
This workshop manual contains technical data, de-
scriptions and repair instructions for the MS2 reverse
gear, all versions, and sail boat drive 120S, all ver-
sions. The repair methods for the reverse gear and
drive (upper gear) are essentially the same. Where
they differ, this is noted.
In all correspondence, the product designation and se-
rial number must be specified.
The workshop manual has been primarily prepared for
Volvo Penta service workshops and their qualified per-
sonnel. This assumes that people who use the Manu-
al have basic knowledge of marine drive systems and
can do the tasks of a mechanical or electrical nature
associated with the trade.
Volvo Penta constantly improves its products, so we
reserve the right to make modifications without prior
notification. All information in this manual is based on
product data which was available up to the date on
which the manual was printed. Any material changes
introduced into the product or service methods after
this date are notified by means of Service Bulletins.
Spare parts
Spare parts for electrical and fuel systems are subject
to various national safety requirements such as the
US Coast Guard Safety Regulations. Volvo Penta
Original Spares comply with these requirements.
No damage whatever, occasioned by use of non-origi-
nal Volvo Penta spares for the product, will be com-
pensated by the warranty offered by Volvo Penta.