Eccellenza Café – Service Manual
August 5, 2013
43
9.
Reconnect all of the wiring harness connectors to the control board / options board
assembly, including the ground wires to the tab on the control board heat sink.
10.
When reconnecting the single black and single red wires, the black wire connects to
J-12 and the red connects to J-13.
11.
Once all of the wiring connections are made, re-install the powder wall and the
powder dispensers.
12.
Re-install the machine’s left side panel and its top panel.
13.
Reconnect the service cord to the wall outlet.
14.
Switch the machine power on and test the equipment operation.
NOTE:
The wiring connectors are matched with their respective connectors on the
board assembly, reducing the likelihood of making connection errors.
Make certain to push the wiring connectors firmly into the board
connectors, ensuring that they are locked in place.
