![Vivotek AW-IHT-1270 User Manual Download Page 77](http://html1.mh-extra.com/html/vivotek/aw-iht-1270/aw-iht-1270_user-manual_1041015077.webp)
69
VLAN ID
Configures the VLAN that you want to configure.
MAC
Address
Configures the multicast MAC which will not be aged out.
Valid format is hh:hh:hh:hh:hh:hh.
Port
Configures the member port for the multicast address.
Apply
Click Apply to save your changes back to the Switch.
Refresh
Click Refresh to begin configuring this screen afresh.
6.2.6.
Explicit Host Tracking
This capability enables the Switch to track each individual host that is joined to a particular group
or channel and to achieve minimal leave latencies when hosts leave a multicast group or channel.
Notice:
✓
Before configuring the ip igmp explicit-tracking command, IGMP must be enabled.
✓
When explicit host tracking is enabled, the router uses more memory than if explicit
tracking is disabled because the router must store the membership state of all hosts on the
interface.
6.2.6.1.
CLI Configurations
Node
Command
Description
enable
show ip multicast
This command shows the IGMP snooping
membership information.
enable
show igmp-snooping
membership
This command shows the IGMP snooping host
membership information.
configure igmp-snooping explicit-
tracking
This command enables the IGMP snooping
explicit host tracking on the Switch.
configure no igmp-snooping explicit-
tracking
This command disables the IGMP snooping
explicit host tracking on the Switch.
6.2.6.2.
Web Configurations
Parameter
Description
Explicit
Tracking state
The filed enables/disables the IGMP Snooping explicit host tracking state on
the Switch.
IGMP Snooping Membership Table