141
6.13.1.2.
CLI Configuration
Node
Command
Description
enable
show spanning-tree
active
This command displays the spanning tree information
for only active port(s)
enable
show spanning-tree
blockedports
This command displays the spanning tree information
for only blocked port(s)
enable
show spanning-tree
port detail PORT_ID
This command displays the spanning tree information
for the interface port.
enable
show spanning-tree
statistics PORT_ID
This command displays the spanning tree information
for the interface port.
enable
show spanning-tree
summary
This command displays the summary of port states and
configurations
enable
clear spanning-tree
counters
This command clears spanning-tree statistics for all
ports.
enable
clear spanning-tree
counters PORT_ID
This command clears spanning-tree statistics for a
specific port.
configure spanning-tree (disable
| enable)
This command disables / enables the spanning tree
function for the system.
configure spanning-tree
algorithm-timer
forward-time TIME
max-age TIME hello-
time TIME
This command configures the bridge times (forward-
delay,max-age,hello-time).
configure no spanning-tree
algorithm-timer
This command configures the default values for
forward-time & max-age & hello-time.
configure spanning-tree
forward-time <4-30>
This command configures the bridge forward delay time
(sec).
configure no spanning-tree
forward-time
This command configures the default values for
forward-time.
configure spanning-tree hello-
time <1-10>
This command configures the bridge hello time(sec).
configure no spanning-tree
hello-time
This command configures the default values for hello-
time.
configure spanning-tree max-
age <6-40>
This command configures the bridge message max-age
time(sec).
configure no spanning-tree
max-age
This command configures the default values for max-
age time.
configure spanning-tree mode
(rstp|stp)
This command configures the spanning mode.
configure spanning-tree
pathcost method
(short|long)
This command configures the pathcost method.
configure spanning-tree priority
<0-61440>
This command configures the priority for the system.
configure no spanning-tree
priority
This command configures the default values for the
system priority.
