201
SNMP State
Select
Enable
to activate SNMP on the Switch.
Select
Disable
to not use SNMP on the Switch.
System Name
Type a System Name for the Switch.
(The System Name is same as the host name)
System Location
Type a System Location for the Switch.
System Contact
Type a System Contact for the Switch.
Apply
Click Apply to configure the settings.
Refresh
Click this button to reset the fields to the last setting.
Community Name:
Parameter
Description
Community String
Enter a Community string, this will act as a password for requests from
the management station.
An SNMP community string is a text string that acts as a password. It is
used to authenticate messages that are sent between the management
station (the SNMP manager) and the device (the SNMP agent). The
community string is included in every packet that is transmitted between
the SNMP manager and the SNMP agent.
Rights
Select Read-Only to allow the SNMP manager using this string to
collect information from the Switch.
Select Read-Write to allow the SNMP manager using this string to
create or edit MIBs (configure settings on the Switch).
Network ID of
Trusted Host
Type the IP address of the remote SNMP management station in dotted
decimal notation, for example 192.168.1.0.
Mask
Type the subnet mask for the IP address of the remote SNMP
