207
Parameter
Description
View Name
Enter the v3 view name for creating an entry in the SNMPv3 MIB
view table.
View Subtree
The OID defining the root of the subtree to add to (or exclude from) the
named view.
View Type
Select
included
or
excluded
to
define subtree adding to the view or
not.
Apply
Click
Apply
to configure the settings.
Refresh
Click
Refresh
to begin configuring this screen afresh.
SNMPv3 View Status
View Name
This field displays the v3 view name.
View Subtree
This field displays the subtree.
View Type
This field displays the subtree adding to the view or not.
Action
Click
Delete
to remove a v3 view.
9.2.
Auto Provision
9.2.1.
Introduction
Auto provision is a service that service provider can quickly, easily and automatically configure
remote device or doing firmware upgrade at remote side.
1.
When the Auto Provision is enabled, the Switch will download the auto provision information
file from the auto provision server first.
The file name is followed below naming rule:
Model_Name_Autoprovision.txt
For Example:
INS-8648_Autoprovision.txt
The contents of the file are listed below:
AUTO_PROVISION_VER=1
Firmware_Upgrade_State=1
Firmware_Version=8648P-000-1.1.0.S0
Firmware_Image_File=8648P-000-1.1.0.S0.fw
Firmware_Reboot=1
Global_Configuration_State=0
Global_Configuration_File=8648P-000-1.1.0.S0.save
Global_Configuration_Reboot=0
Specific_Configuration_State=0
Specific_Configuration_Reboot=0
