Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Page: 98 / 329

User Manual rev. 1.1. Aug. 2015
98
Parameter description:
Hash Code Contributors

Source MAC Address :
The Source MAC address can be used to calculate the destination port for the
frame. Check to enable the use of the Source MAC address, or uncheck to disable.
By default, Source MAC Address is enabled.

Destination MAC Address :
The Destination MAC Address can be used to calculate the destination port for the
frame. Check to enable the use of the Destination MAC Address, or uncheck to
disable. By default, Destination MAC Address is disabled.

IP Address :
The IP address can be used to calculate the destination port for the frame. Check
to enable the use of the IP Address, or uncheck to disable. By default, IP Address
is enabled.

TCP/UDP Port Number :
The TCP/UDP port number can be used to calculate the destination port for the
frame. Check to enable the use of the TCP/UDP Port Number, or uncheck to
disable. By default, TCP/UDP Port Number is enabled.
Aggregation Group Configuration

Group ID :
Indicates the group ID for the settings contained in the same row. Group ID
"Normal" indicates there is no aggregation. Only one group ID is valid per port.

Port Members :
Each switch port is listed for each group ID. Select a radio button to include a port
in an aggregation, or clear the radio button to remove the port from the
aggregation. By default, no ports belong to any aggregation group. Only full
duplex ports can join an aggregation and ports must be in the same speed in each
group.

Buttons
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.