Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Page: 295 / 329

User Manual rev. 1.1. Aug. 2015
295

DHCP Server Setting:
If you want to enable the embedded DHCP server, deselect the “IPv4 DHCP Enable”
(Client) checkbox.
The DHCP (Dynamic Host Configuration Protocol) default is disabled. If you join
the switch into an established network, make sure the DHCP server is disabled.
For an unmanaged network, you can enable the DHCP server function and let it
manage the IP addresses of devices attached to the switch.
IMPORTANT:
1. If you attach the PoE switch to a network that is already managed by a DHCP server,
IP conflicts will occur. You should then disable the onboard DHCP server first.
2. If you have a 104A switch up and running and enabled its DHCP function, you should
disable the DHCP server on another 104A PoE switch if you need to join it to your
network. Multiple 104A switches can be managed in the same network using a
Master-slave configuration. Therefore, except the Master/Root switch, disable the
Surveillance state function on other PoE switches.

IP Pool Starting address:
The starting address of IPv4 address for the interface VLAN1, e.g., 192.168.x.x.

Size of Pool:
The IPv4 network size: can be a number starting from 1 to 254.