Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Page: 77 / 329

User Manual rev. 1.1. Aug. 2015
77
Parameter description:

Port :
The logical port for the settings contained in the same row.

Policy ID :
Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.

Action :
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".

Rate Limiter ID :
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16. The default value is "Disabled".

Port Redirect :
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default
value is "Disabled".

Mirror :
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".

Logging :
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log memory size and
logging rate is limited.

Shutdown :
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".

State :
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL
user module.
Disabled: To close ports by changing the volatile port configuration of the ACL
user module.
The default value is "Enabled"

Counter :
Counts the number of frames that match this ACE.

Buttons
Apply – Click to save changes.