Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Page: 297 / 329

User Manual rev. 1.1. Aug. 2015
297
Parameter description:
Time Configuration

Clock Source:
There are two modes for configuring how the Clock Source from. Select "Use
Local Settings;" Clock Source from Local Time. Select "Use NTP Server;" Clock
Source from NTP Server.

System Date:
Displays the current time of the system. The year of system date limits between
2011 and 2037.
Time Zone Configuration

Time Zone:
Lists various Time Zones worldwide. Select an appropriate Time Zone from the
drop down and click Apply to set.

Acronym:
User can set the acronym of the time zone. This is a User configurable acronym to
identify the time zone. ( Range : Up to 16 characters )
Daylight Saving Time Configuration

Daylight Saving Time:
This is used to set the clock forward or backward according to the configurations
set below for a defined Daylight Saving Time duration. Select 'Disable' to disable
the Daylight Saving Time configuration. Select 'Recurring' and configure the
Daylight Saving Time duration to repeat the configuration every year. Select
'Non-Recurring' and configure the Daylight Saving Time duration for single time
configuration. (Default: Disabled).
Recurring Configuration

Start time settings:
Week - Select the starting week number.
Day - Select the starting day.
Month - Select the starting month.
Hours - Select the starting hour.
Minutes - Select the starting minute.

End time settings:
Week - Select the ending week number.
Day - Select the ending day.
Month - Select the ending month.
Hours - Select the ending hour.
Minutes - Select the ending minute.

Offset settings:
Offset - Enter the number of minutes to add during Daylight Saving Time. (Range:
1 to 1440)
N
OTE
:
The under “Start Time Settings” and “End Time Settings” was
displayed what you set on the “Start Time Settings” and “End Time Settings”
field information.