Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Page: 255 / 329

User Manual rev. 1.1. Aug. 2015
255
Auto-refresh: Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh: Click to refresh the page.
4-10.3 PoE
This page allows the user to inspect the current status for all PoE ports. The section show all
port Power Over Ethernet Status.
Web Interface
To show LLDP EEE neighbors:
1. Click Monitor ,LLDP, PoE
2. Display Power Over Ethernet Status Information
3. Click Auto-refresh for auto-update web screen
Figure 4-10.3: The LLDP Neighbors EEE information
Parameter description:

Local Port :
The port for this switch on which the LLDP frame was received.

Power Type :
The Power Type represents whether the device is a Power Sourcing Entity (PSE) or Power
Device (PD).
If the Power Type is unknown it is represented as "Reserved".

Power Source :
The Power Source represents the power source being utilized by a PSE or PD device.
If the device is a PSE device it can either run on its Primary Power Source or its Backup
Power Source. If it is unknown whether the PSE device is using its Primary Power Source
or its Backup Power Source it is indicated as "Unknown"
If the device is a PD device it can either run on its local power supply or it can use the PSE
as power source. It can also use both its local power supply and the PSE.
If it is unknown what power supply the PD device is using it is indicated as "Unknown"

Power Priority :
Power Priority represents the priority of the PD device, or the power priority associated with
the PSE type device's port that is sourcing the power. There are three levels of power
priority. The three levels are: Critical, High and Low.