Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Page: 116 / 329

User Manual rev. 1.1. Aug. 2015
116
3-9.1.2 VLAN Configuration
The section describes the VLAN configuration setting process integrated with IGMP Snooping
function. For Each setting page shows up to 99 entries from the VLAN table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the VLAN Table. The first displayed will be the one
with the lowest VLAN ID found in the VLAN Table. The "VLAN" input fields allow the user to
select the starting point in the VLAN Table. Clicking the button will update the displayed table
starting from that or the next closest VLAN Table match.
Web Interface
To configure the IGMP Snooping VLAN Configuration in the web interface:
1. Click Configuration, IPMC, IGMP Snooping, VLAN Configuration
2. Evoke to select enable or disable Snooping , IGMP Querier. Specify the parameters in the
blank field.
3. Click the refresh to update the data or click << or >> to display previous entry or next entry.
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values
Figure 3-9.1.2: The IGMP Snooping VLAN Configuration.
Parameter description:

Delete :
Check to delete the entry. The designated entry will be deleted during the next save.

VLAN ID :
It displays the VLAN ID of the entry.

IGMP Snooping Enabled :
Enable the per-VLAN IGMP Snooping. Only up to 32 VLANs can be selected. .

Querier Election :
Enable to join IGMP Querier election in the VLAN. Disable to act as an IGMP Non-Querier.

Querier Address :