manualshive.com logo in svg

Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Share
Download
Vivotek AW-GEV-104A Series User Manual And Warranty Statement Download Page 173

 

 

 

User Manual rev. 1.1. Aug. 2015 

173 

Available QoS Class value ranges from 0 to 7. QoS Class (0-7) can be mapped to followed 
parameters.  

 

DPL : 

Drop Precedence Level (0-1) can be configured for all available QoS Classes.   

 

DSCP : 

Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding QoS Class   

and DPL value 

 

Buttons: 

Apply – Click to save changes. 

Reset- Click to undo any changes made locally and revert to previously saved 

values. 

 

Auto-refresh : 

To evoke the auto-refresh icon then the device will refresh the information automatically. 

 

Upper right icon (Refresh):   

You can click them for refresh the DSCP Classification information by manual. 

 

 

Summary of Contents for AW-GEV-104A Series










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands