Vivotek AW-GEV-104A Series User Manual And Warranty Statement Download Page 206

Page: 206 / 329

User Manual rev. 1.1. Aug. 2015

206



Rx and Tx NAK:

The number of NAK (option 53 with value 6) packets received and transmitted.



Rx and Tx Release:

The number of release (option 53 with value 7) packets received and transmitted.



Rx and Tx Inform:

The number of inform (option 53 with value 8) packets received and transmitted.



Rx and Tx Lease Query:

The number of lease query (option 53 with value 10) packets received and transmitted.



Rx and Tx Lease Unassigned:

The number of lease unassigned (option 53 with value 11) packets received and transmitted.



Rx and Tx Lease Unknown:

The number of lease unknown (option 53 with value 12) packets received and transmitted. Rx and Tx
Lease Active



Rx and Tx Lease Active:

The number of lease active (option 53 with value 13) packets received and transmitted.



Rx Discarded checksum error:

The number of discard packet that IP/UDP checksum is error.



Rx Discarded from Untrusted:

The number of discarded packet that are coming from untrusted port.

Summary of Contents for AW-GEV-104A Series










































































































































































































































































































































Search results

Summary of Contents for AW-GEV-104A Series

Reviews:

Brands by name

Popular brands

Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Search results

Summary of Contents for AW-GEV-104A Series

Reviews:

Brands by name

Popular brands