Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Page: 286 / 329

User Manual rev. 1.1. Aug. 2015
286
6-4 Configuration
The switch stores its configuration in a number of text files in CLI format. The files are either
virtual (RAM-based) or stored in flash on the switch.
There are three system files:
 running-config: A virtual file that represents the currently active configuration on the
switch. This file is volatile.
 startup-config: The startup configuration for the switch, read at boot time.
 default-config: A read-only file with vendor-specific configuration. This file is read when
the system is restored to default settings.
It is also possible to store up to two other files and apply them to running-config, thereby
switching configuration.
6-4.1 Save startup-config
This copy running-config to startup-config, thereby ensuring that the currently active
configuration will be used at the next reboot.
Web Interface
To save running configuration in the web interface:
1. Chick Browser to select Maintenance/Configuration in you device.
2. Click Apply Startup-Config Select.
Figure 6-4.1: The Save Startup Configuration
Parameter description:

Buttons :
Save Configuration:
Click to save configuration, the running configuration will be written to
flash memory for system boot up to load this startup configuration file.