Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Page: 51 / 329

User Manual rev. 1.1. Aug. 2015
51
3-5.1.6.4 Users
The function is used to configure SNMPv3 user. The Entry index key is UserName. To create
a new UserName account, please check <Add new user> button, and enter the user
information then check <Save>. Max Group Number : 10.
Web Interface
To display the configure SNMP Users in the web interface:
1. Click SNMP, Users.
2. Specify the Privilege parameter.
3. Click
Apply.
Figure 3-5.1.6.4: The SNMP Users Configuration
Parameter description:

Delete
Check to delete the entry. It will be deleted during the next save.

Engine ID
An octet string identifying the engine ID that this entry should belong to. The
string must contain an even number (in hexadecimal format) with number of
digits between 10 and 64, but all-zeros and all-'F's are not allowed. The SNMPv3
architecture uses the User-based Security Model (USM) for message security and
the View-based Access Control Model (VACM) for access control. For the USM
entry, the usmUserEngineID and usmUserName are the entry's keys. In a simple
agent, usmUserEngineID is always that agent's own snmpEngineID value. The
value can also take the value of the snmpEngineID of a remote SNMP engine with
which this user can communicate. In other words, if user engine ID equal system
engine ID then it is local user; otherwise it's remote user.

User Name
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 32, and the allowed content is ASCII characters from 33 to