manualshive.com logo in svg

Vivotek AW-GEV-104A Series, User Manual And Warranty Statement

Share
Download
Vivotek AW-GEV-104A Series User Manual And Warranty Statement Download Page 93

 

 

 

User Manual rev. 1.1. Aug. 2015 

93 

Select the checkbox to translate the entry to static entry. 

 

 

Buttons: 

Apply – Click to save changes. 
Reset- Click to undo any changes made locally and revert to previously saved 

values. 

Auto-refresh:  

Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds. 

Refresh: 

  Refreshes the displayed table starting from the input fields. 

Save: 

  Click to save changes. 

Reset: 

  Click to undo any changes made locally and revert to previously saved values. 

<<: 

  Updates the table starting from the first entry in the Dynamic ARP Inspection Table. 

>>: 

Updates the table, starting with the entry after the last entry currently displayed 

Summary of Contents for AW-GEV-104A Series










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands