Vitek VT-SRE Spire Elite, User Manual

Page: 4 / 150

Introduction
4
User Manual on USB
Safety instructions
Vitek shall not have any responsibility for any accident or damage that may incur during the use of the product. For your safety,
we provide the following instructions regarding installation, cleaning, assembly/disassembly of the product. Please read
carefully, and comply with the instructions.
Before installation
Comply with the following instructions to prevent fire, explosion, system failure or electrical shock.
~ Remove the power supply module before proceeding.
~
Check the input voltage (AC100V–AC240V) to the power supply module before connecting it.
~ Keep the product away from humidity.
~ Ensure that all devices connected to the product are properly earth-grounded.
in operation mode
Comply with the following instructions to prevent fire, explosion, system failure or electric shock.
~ if you need to open the cover, consult with an authorized Vitek service technician.
~ Do not connect multiple devices to a single power outlet.
~ Keep the product away from dust or combustible substances (ex: propane gas).
~ Do not touch product with wet hands.
~ Do not insert anything into the vent of the ventilation system.
~ Do not apply excessive force when unplugging the power cord.
Disassembly & Cleaning
~ When cleaning the surface, use a dry cloth.
~ Do not wipe the product using water, paint thinner or organic solvents.
~ Do not dismantle, repair or modify the product on your own.
During installation
To prevent an accident or physical injury , please comply with the following:
~ Secure at least 6 inches of distance between cooling fan and wall for a proper ventilation.
~ install the product on a flat surface.
~ Keep product away from direct sunlight or excessive temperature.
While in use
~ Do not apply force or shake product while using it.