Vitek VT-SRE Spire Elite, User Manual

Page: 84 / 150

System Setting
84
\ \
Event Notification
Specify the methods of notification such as buzzer, video popup or email if an event occurs.
1.
From <MEnU> - <SySTEM SETUP> - <EVEnT>, select <EVEnT nOTiFiCATiOn>.
2.
Use the [
▲▼◀▶
] buttons on the remote control or use the mouse to select one from <BUZZER>, <DiSPLAy> and
<EMAiL>.
3.
Use the [
▲▼◀▶
/EnTER] buttons on the remote control or use the mouse to set the output method and duration.
4.
To apply the change, click <APPLy> in the bottom of the screen.
5.
When done, press the [ExiT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Buzzer output
you can notify the user of an event using the buzzer.
i
DURATiOn
-
TRAnSPAREnT : Keep the buzzer out for as
long as the event occurs.
-
UnTiL KEy : Keep the buzzer out until a mouse
or remote control button is pressed.
-
5 ~ 300 SEC : Keep the buzzer out for a specified
time.
Display
if an event occurs, you can configure the video popup or a
popup message to notify the user.
i
ViDEO POPUP : Display the video channel that is
synchronized with the event on a single split screen.
Set the DURATiOn of the single split screen.
-
TRAnSPAREnT : Keep the video popup
displayed as long as the event occurs.
-
UnTiL KEy : Keep the video popup displayed until
a mouse or remote control button is pressed.
-
5 ~ 300 SEC : Keep the video popup displayed
for a specified time.
if multiple events occur at the same time, or if
multiple event-related video channels exist, the video popup will be displayed in the maximum split screen mode
rather than the single split screen mode.
i
OSD POPUP : This will notify the user of an event with a popup message if an OSD popup event occurs.
you can adjust the duration of the popup message.
-
UnTiL KEy : Keep the OSD popup displayed until a mouse or remote control button is pressed.
-
5 ~ 300 SEC : Keep the OSD popup displayed for a specified time.