Vitek VT-SRE Spire Elite User Manual Download Page 120

Page: 120 / 150

Web Viewer

120

Control Device Setting

Configure the keyboard controler.

Change the communication settings and click <APPLy> to

apply the changes.

For more information, refer to "Control Device". (page 79)

Storage

Device Information

internal storage devices physically installed in the DVR and their recording time information are displayed.

S.M.A.R.T Status

The detailed S.M.A.R.T information of each internal storage device is displayed.

What is S.M.A.R.T?

This is a sort of HDD self-diagnosis tool that detects any

error on the system and alerts the user if an error occurs.

For more information, refer to "S.M.A.R.T." on page 82

Summary of Contents for VT-SRE Spire Elite























































































































































Search results

Summary of Contents for VT-SRE Spire Elite

Reviews:

Related manuals for VT-SRE Spire Elite

Brands by name

Popular brands

Vitek VT-SRE Spire Elite, User Manual

Search results

Summary of Contents for VT-SRE Spire Elite

Reviews:

Related manuals for VT-SRE Spire Elite

Brands by name

Popular brands