Vitek VT-SRE Spire Elite, User Manual

Page: 70 / 150

System Setting
70
you can configure audio related settings (channel and network transfer) and signal beep for remote control operations.
\ \
Audio
Choose whether to receive the live sound source and select an audio channel.
1.
From <MEnU> - <SySTEM SETUP> - <AUDiO>, select <AUDiO>.
2.
Use the [
▲▼◀▶
/EnTER] buttons on the remote control
or use the mouse to select an item that you want to
edit.
i
AUDiO OUTPUT TyPE : RCA or HDMi - listen to
Audio over RCA output or lisrten to audio over
HDMi cable.
i
DEFAULT LiVE AUDiO CHAnnEL : select an audio
channel to monitor on the live screen.
i
nETWORK AUDiO TRAnSMiSSiOn : enables audio
transmission to a remote client (smart phone, PC,
etc)
i
RECEiVE nETWORK AUDiO : enables audio
reception from a remote client (PC).
3.
To apply the change, click <APPLy> in the bottom of the screen.
4.
When done, press the [ExiT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
\ \
Buzzer
Enables/disables a beeping sound when you manipulate the remote control.
1.
From <MEnU> - <SySTEM SETUP> - <AUDiO>, select
<BUZZER>.
2.
Use the [
▲▼◀▶
/EnTER] buttons on the remote control
or use the mouse to select an item that you want to
edit.
i
REMOTE COnTROLLER : enable/disable a beeping
sound when you press a button on the remote
control.
3.
To apply the change, click <APPLy> in the bottom of
the screen.
4.
When done, press the [ExiT] button on the remote
control or click <CLOSE> in the lower screen. The confirmation message appears and you will return to the previous
menu.