4
D-303166 AmberLink™ User Guide
WIRELESS EMERGENCY RESPONSE SYSTEM
Congratulations on your purchase of the wireless
AmberLink™ Personal Emergency Response system.
This home health care signaling system was designed
to support people in their home environment. In the
event of an emergency, help can be summoned at the
press of a button and that same message can be sent to
private numbers that you have selected for notification.
In the event of fire, the system can be programmed to
automatically call the monitoring station or to private
phones.
Local and Remote Programming may be performed over
telephone and GSM connections.
The Unit's LEDs show the system status.
The Unit's rechargeable backup battery provides backup
operation. When AC power is restored, the backup
battery is automatically recharged.
What's Included
Before you begin to set up your system, make sure you
have all the necessary components.
AmberLink Unit
Transformer Input 120VAC 60 Hz / Output 9VAC 0.1A
Pendant transmitters supplied with necklace
Additional Accessories (Optional)
USB Programming Cable or RS-232 Dual
Programming Cable and Adaptor
Supervised wireless smoke detector (MCT-426)
Waterproof arm/disarm security activation pendant
transmitter (MCT-201 WP)
Fully supervised indoor, PowerCode, flood detector
(MCT-550)
Wristband supplied for (MCT-212)
Pet-Immune PowerCode wireless PIR motion detector
(NEXT K9-85)
Supervised PowerCode magnetic contact transmitter
(MCT-302)
Microprocessor controlled wireless repeater (MCX-
600PERS)
Supervised wireless emergency button (MCT-220)
The system unit is shown in Figure 1.
Note:
All of the listed transmitters have a PERS suffix.
In addition, the "txid" code of each transmitter is printed
on the packaging.
Note:
PowerCode refers to Visonic's proprietary
communications protocol which makes use of unique ID
codes.
AmberLink
MCT-212 MCT-211
MCT-426
MCT-550
(Flood Detector)
MCT-442
MCT-201 WP
RS-232 Dual Programming
Cable
NEXT K9-85
MCT-302
MCT-220