16
D-303166 AmberLink™ User Guide
Using your AmberLink
Your AmberLink is the communication center of your system. When your pendant transmitter or
optional fall-detector/smoke detector signals the AmberLink, the AmberLink contacts your
Monitoring Center or private phones to report the emergency event.
Your AmberLink includes the following buttons.
HELP
– When pressed, an emergency alarm is reported to the Monitoring Center or to private
phones.
CANCEL
– This button should be pressed to:
-
Stop dialing
-
Confirm a reminder
-
Reset the inactivity timer
Using your Pendant Transmitter
The pendant transmitter can be used to initiate an emergency call and also to answer incoming
calls.
Pendant Activation
- Your pendant transmitter lets you signal to the AmberLink from
anywhere in your home when you need emergency assistance. You should wear your pendant
transmitter whenever you are at home even in the shower or bath. Your pendant transmitter is
waterproof.
Your pendant transmitter can be activated by simply pushing its red button. Once pushed, a
signal is sent from the pendant transmitter to the AmberLink, the red LED on the pendant
transmitter illuminates and a success beep is heard. The AmberLink then calls the Monitoring
Center or a private phone.
If your phone is ringing, pressing the pendant's red button once will answer the incoming call.
You can then talk over the unit's speakerphone. To end the speakerphone call and hang up,
simply press the pendant button again.
Neckband
- You can wear the pendant transmitter using the neckband. Slip the tab on the
neckband into the slot on the pendant transmitter and fasten the tab.
Optional
Wristband
- Your pendant transmitter can also be used with an optional wristband.
To make the pendant transmitter wristband smaller, slide the pendant transmitter towards the
buckle. To make the wristband larger, slide the pendant transmitter away from the buckle.
Calling for Emergency Assistance
If you need emergency assistance, press the button on your pendant transmitter or press the
HELP button on your AmberLink. After you press the "HELP" button, you will hear a confirmation
sound.
The AmberLink calls your Monitoring Center or a private phone and sends an emergency alarm.
When your Monitoring Center representative or the person on the private phone answers, you
can hear them talking to you through the AmberLink.
If you have a phone connected to the AmberLink and want to use the phone to talk with the
representative, let the representative know and the Monitoring Center will return your call.