D-303166 AmberLink™ User Guide
15
MOUNTING THE UNIT
The Unit can be located on a table, or on a wall. In both cases the Unit should be near an
electrical outlet and phone line.
Mounting the Unit on a Table
Insert the AmberLink stand into the holes (see figure 8) and place the AmberLink on a table.
Figure 8
– Table Stand Mounting
Note:
The table stand can be easily disassembled by inserting a screwdriver into the rib space of
the stand and with the screwdriver pulling the stand away from the unit.
Mounting the Unit on the Wall
1. Drill 2 holes in the mounting wall and
insert wall anchors.
2. Insert 2 screws in the wall (leave a 5 mm
or 0.2 inch gap between the screw heads
and the wall).
3. Mount the AmberLink on the screws as
shown in the illustration.
Figure 9 -
Wall Mounting