10
D-303166 AmberLink™ User Guide
4.
Insert the GSM module to its designated
location on the front cover. First, plug the
module pins into the pin connector.
5.
Lower the GSM module so that the grooves
on both sides fit onto the rails situated on the
cover.
6.
Secure the GSM module in place by
tightening its screw.
7.
Close the panel covers, tightening the four
screws (removed in step 2) to secure the
panel shut.
8.
Reconnect the panel’s battery and return it to
the battery enclosure, and close the
enclosure’s cover.
4
5
6
Figure 4c
– Inserting the GSM module
Inserting the GSM Module’s SIM Card
To enable GSM communication with the CMS, a standard universal SIM card with Voice and
Text in “Activated” state is required. Make sure the SIM card has sufficient voice minutes and
SMS allowance before installation. Insert the SIM card into the GSM module as described below.
1.
Slide the top cover.
2.
Open the cover.
3.
Align the SIM card to the cover (note the
SIM card’s orientation as you insert it.
4.
Slide the SIM card into the cover.
5.
Rotate the cover to close.
6.
Lock the cover.
1
6
4
5
2
3
Figure 5
– Inserting the SIM card
