D-303166 AmberLink™ User Guide
9
Installing a GSM Module (optional)
As an option, an internal GSM 350 module enables the AmberLink system to operate over a GSM
cellular network. AmberLink connects over GSM to the Central Monitoring Station (CMS), therefore
allowing you to send reports to the CMS and SMS messages to other private phone users.
The GSM modem auto detection feature enables automatic enrollment of the GSM modem into the
AmberLink panel memory. GSM modem auto detection is activated after reset (device power-up).
CAUTION
:
Make sure that the AmberLink panel is powered OFF and disconnected from the mains
power before opening the panel.
Inserting the GSM Module into the AmberLink Panel
1.
Open the battery enclosure on the back
cover, disconnect the battery and remove it.
1
Figure 4a
– Removing the battery
2.
Loosen and remove the four screws which
secure the panel.
3.
Remove the back panel cover and place it
aside temporarily.
2
3
2
2
2
Figure 4b
– Removing the back panel cover