18
D-303166 AmberLink™ User Guide
MAINTAINING YOUR SYSTEM
The transmitter may get dirty as it’s touched with your fingers. Clean it only with a soft cloth or
sponge moistened lightly with a mixture of water and mild detergent, and wipe it dry immediately.
The use of abrasives of any kind is strictly forbidden.
Also, never use solvents such as kerosene, acetone or thinner.
Note:
The AmberLink system must be checked by a qualified technician at least once every
three years.
Pendant transmitter Test
To test your pendant(s) regularly, your installer must enable this feature during configuration. At
the scheduled time, the pendant’s LED blinks to instruct the user to press the Transmit button to
confirm the test.
LED indicator
Velcro strap
Transmit
Button
Loop
Figure 10 –
MCT-212 Pendant
When a Pendant's Battery is Low
When the MCT-212 pendant transmitter's battery is low, its LED flashes rapidly several times per
second during transmission.
When a Smoke Detector's Battery is Low
When a smoke detector's battery voltage is low, the smoke detector alerts you by beeping every
35 seconds until replacement of the detector's battery. The smoke detector's batteries should last
from 5 to 8 years, depending on the battery type. To replace the batteries, refer to the
instructions provided with the smoke detector.
