VIPColor VP485 User Manual Download Page 25

Page: 25 / 74

Setting Up the Printer

Install the Printer on a Network

The Advanced model of the VP4X5 printer can be set up to print over a network.
To do so, you will need a static IP address for the printer.

First Time Setup

If you are setting up the printer for the first time, follow these steps:
•

Enter IP Address for the Printer

•

Install Printer Driver and Add TCP/IP Printer Port

Enter IP Address for the Printer

1. Press the

MENU

button on the printer control panel.

2. Scroll down and select

Network Configure

3. Select

IP ADDR

a Press

Edit

and use the up and down buttons to enter the IP address.

b Press

(enter) when done.

4. Select

Subnet Mask

a Press

Edit

and use the up and down buttons to enter the subnet mask.

b Press

(enter) when done.

Install Printer Driver and Add TCP/IP Printer Port

1. Connect a network cable to the printer and computer.
2. If the Windows Add Hardware Wizard appears, click

Cancel

. Do not install the

printer driver using the Add Hardware Wizard.

3. Insert the

VIPColor BarTender UltraLite

CD into the disk drive.

4. Select

Seagull Printer Drivers

and then select

Install Printer Driver

5. Follow the Seagull DriverWizard instructions to install the printer driver.

Summary of Contents for VP485











































































Search results

Summary of Contents for VP485

Reviews:

Related manuals for VP485

Brands by name

Popular brands

VIPColor VP485, User Manual

Search results

Summary of Contents for VP485

Reviews:

Related manuals for VP485

Brands by name

Popular brands