VIPA SSM-BG41, Manual

Page: 135 / 286

Manual BG41/BG42/BG43 Software
Rev. 99/49 4-19
E1/2 The ASCII character of the end identifier
Left Byte: 1. end character
Right Byte: 2. end character
is used as the 2. end character 0h. In this way only one end character is evaluated.
ZVZ Character delay time in 50ms units.
FEHL
This byte has a value of 0, if functioning correctly. In the case of a malfunction an
error code is entered. The error is acknowledged immediately, i.e. the byte is reset
at 0 once the cause of the error has been eliminated.
An overview of the possible error codes can be found in chapter 4.1.5.3.
Telegram structure:
4.1.6.2 FB43 (SEND), data output with STX/ETX procedure
This data handling block replaces the FB3. The list of parameters is identical to those of the FB3.
The description of FB3 can be found in chapter 4.1.5.1.
4.1.6.3 FB44 (RECEIVE), data reception with STX/ETX procedure
This data handling block replaces the FB4. The list of parameters is identical to those of the FB4.
A description of FB4 can be found in chapter 4.1.5.2.
Example of STX/ETX:
Call the FB100 before the FB40 and select the procedure STX/ETX.
BAUSTEIN#OB20/OB21/OB22
00002
:SPA FB 100
NAME #PROCW
ADR
=KH F080 Building block’s address
KANR =KF +1 Channel number
PROC =KF +1 Procedure number(1 = STX/ETX)
FEHL =MB 199 Error byte
0000E :
00010 :SPA FB 40
NAME #PARA-STX
ADR
=KH F080 Buildling block’s address
K/M =KY 1,0 Channel number, without FIFO
STX =KY 0,2 Start character is 02H
E1/2 =KY 3,0 1. End character 03H, no 2. end character
ZVZ =KF +5 Character delay time is 250ms
FEHL =MB 198 Error byte
00022 :BE