VIPA HB130E SM, Manual

Page: 4 / 128

About this Manual
Manual VIPA System 300V
Subject to change to cater for technical progress.
About this Manual
This manual describes the operation of the System 300V and the according
available signal modules (SM). A short overview over the range of products
is followed by a detailed description of the single modules. You will get
information for connecting and operating the System 300V and the
additional SM modules.
Chapter 1: Basics
This introduction includes recommendations on the handling of the
modules of the VIPA System 300V and introduces you to central res.
decentral automation systems.
Chapter 2: Installation and assembly guide lines
All information that you need for installation and cabling of a PLC with
components of the System 300V may be found in this chapter.
Chapter 3-5: Digital in-/output modules
These chapters introduce you to the digital peripheral modules of the
System 300V from VIPA and contain all information that you will need for
installation. Chapter 3 contains information about the digital input modules,
chapter 4 describes the digital output modules and chapter 5 concerns to
the combined input/output modules.
Chapter 6-7: Analog in-/output modules
Content of these chapters is the description of the analog peripheral
modules of the System 300V from VIPA. Chapter 6 gives you all necessary
information about the analog input modules and chapter 7 informs about
the analog output modules.
Overview