Manual VIPA System 300V
Chapter 7 Analog Output Modules
HB130E - SM - Rev. 07/44
7-9
Diagnostics
As soon as an error occurs and activated
Group diagnostics
, it is
protocolled in the diagnostic area that can be evaluated by means of the
user application.
If the diagnostic interrupt is released at the parameterization, incoming and
outgoing error events are signaled by interrupts and monitored on the
according analog output module via LED.
At a diagnostic interrupt the CPU interrupts its user application and works
on the OB 82. For more detailed diagnostic information you may call the
SFC 51 res. SFC 59 in the OB 82. The diagnostic data is consistent until
you leave the OB 82.
When an error occurs and after error correction, the diagnosis is started.
Via the parameterization you fix the diagnosis behavior at error:
A diagnostic interrupt is only transmitted to the CPU, if you have activated
the diagnostic interrupt in the parameterization window.
The following errors a diagnosis:
•
Wire break at current output (only 332-5Hx01)
•
Ground short circuit (only 332-5Hx01)
•
Operate the front switch (only 332-5HDx0)
•
Failure of the external voltage supply
•
Project engineering and parameterization error
Outline
Starting the
diagnosis
Summary of Contents for HB130E SM
