ViewCast Osprey PCI, User Manual

Page: 43 / 126

Osprey PCI User Guide
ViewCast 37
Figure 25. SimulStream evaluation is enabled

Select the check box on the filter tab to enable SimulStream in the evaluation mode for the
currently selected device, and specify how many filters you plan to expose.

All the functions of SimulStream work in the evaluation mode except an evaluation logo displays on
the video. If you set up a custom logo, the evaluation logo preempts it as long as evaluation mode
is turned on.

When SimulStream is installed the controls in this group affect the fully licensed SimulStream
mode, as opposed to the free evaluation mode.
Multiple instances of each filter - This control enables you to run multiple instances on one device
of applications that do not have device select controls. Leave this turned off unless you have a
specific need for it. Turning it on will affect crop, logo, and caption settings. They will share a filter
and not stand separate. Save the most recent crop, logo, or caption setting and overwrite settings
that might have previously been saved from another application.
When you apply this change, a message box comes up asking to restart the system – this change will
not work correctly until you do so.
Show N filters per device
Figure 26. Show filters
You can set up the driver to expose 1 to 10 filters per device (Figure 26). If, for example, 4 filters per
device are chosen, the device list will show four entries for the current device. For device 1A, they
are designated as 1.1, 1.2, 1.3, and 1.4.
When you apply this change, a message box comes up asking you to restart the system – it is
important that you do so. The number of filters you have requested will not display or work
correctly until the system is restarted.