52
Date/Time
setting
Parameter group
select
Function check
start
Function
select
Subscriber check
carry out
Actuator test
carry out
Signal inputs
display
Sensor values
display
Start commissioning?
Temperature
sensors
Signal inputs
Actuator test
Commissioning terminated
Control mode
OK
OK
OK
OK
OK
OK
NO
YES
Function
check
Subscriber check (LON)
Setting Language
Date
setting
Time
setting
OK
OK
OK
Coding
level 1
Parameters
setting
OK
OK
OK
OK
Fig. 48
Commissioning without the commissioning assistant
Activating the service menu
The service menu can be activated from any other
menu.
Hold down
OK
+
å
simultaneously for approx. 4 s.
Deactivating the service menu
The service menu remains active until it is disabled
with
"Terminate service?"
, or if no key is pressed for
30 min.
Setting parameters using "System scheme 7000"
as an example
To set a parameter, first select the parameter group
and then the parameter.
Service menu:
1. Hold down
OK
+
å
simultaneously for approx.
4 s.
2. Select
"Coding level 1"
.
3. Select parameter group:
"System definition"
4. Select parameter:
"System scheme 7000"
5. Set system scheme: e.g.
"6"
Alternatively, if the service menu was already active:
Extended menu
1.
å
2.
"Service"
3. Select
"Coding level 1"
.
4. Select parameter group:
"System definition"
5. Select parameter:
"System scheme 7000"
6. Set system scheme: e.g.
"6"
Commissioning, inspection, maintenance
Commissioning the system
(cont.)
5700 542 GB
