Vidipac VSW7242, User Manual, Page: 63 / 288

63
Action
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default value is "Permit".
Rate Limiter ID
Select which rate limiter to apply on this port. The allowed values are Disabled or the values 1 through 16 .
The default value is "Disabled".
SelectSelect Disabled Port Copy
Select which port frames are copied on. The allowed values are Disabled or a specific port number. The
default value is "Disabled".
Mirror
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled : Frames received on the port are not mirrored.
The default value is "Disabled".
Logging
Specify the logging operation of this port. The allowed values are:
Enabled : Frames received on the port are stored in the System Log.
Disabled : Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log memory size and logging rate is limited.
Shutdown
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled : Port shut down is disabled.
The default value is "Disabled".
Counter
Counts the number of frames that match this ACE.
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Refresh: Click to refresh the page. Any changes made locally will be undone..
Clear: Click to clear the counter
ACL Rate Limiters Configuration
Configure the rate limiter for the ACL of the switch