Vidipac VSW7242, User Manual, Page: 162 / 288

162
Parameters:
<name>: System name string. (1-255)
Example: Contact Name = Orwell
System>contact Orwell
System Name Syntax:
System Name [<name>]
Parameters:
<name>: System name string. (1-255)
Example: Contact Name = poeswitch
System>name poeswitch
poeswitch:/>
(After given system name, the prompt character will be
changed automatically.)
System Location Syntax:
System Location [<location>]
Parameters:
<location>: System location string. (1-255)
Example: Location Name
poeswitch:/System>loca fll_01
Time Zone Offset Syntax:
System Timezone [<offset>]
Parameters:
<offset>: Time zone offset in minutes (-720 to 720) relative to
UTC
Example: Time Zone = 100
poeswitch:/System>time 100
IP Configuration
IP Group
Enter the IP Configuration Group
poeswitch:/>ip
Type 'up' to move up one level or '/' to go to root level
poeswitch:/IP>
DHCP Client
Syntax:
IP DHCP [enable|disable]
poeswitch:/IP>dhcp en
IP Setting (Address,
Mask, Gateway,
Managed VID)
Syntax:
IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>]
Example: IP=192.168.2.2, Mask=255.255.255.0, Gateway:
192.168.2.254, VID=1
poeswitch:/IP>setup 192.168.2.2 255.255.255.0 192.168.2.254 1
NTP Enable NTP Mode by below command:
poeswitch:/IP>ntp mode en