Vidipac VSW7242, User Manual, Page: 37 / 288

37
Indicates the SNMPv3 engine ID. The string must contain an even number(in hexadecimal format) with
number of digits between 10 and 64, but all-zeros and all-'F's are not allowed. Change of the Engine ID
will clear all original local users.
SNMP Trap Configuration
Configure SNMP trap on this page.
Trap Mode
Indicates the SNMP trap mode operation. Possible modes are:
Enable: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
Trap Version
Indicates the SNMP trap supported version. Possible versions are:
SNMPv1: Set SNMP trap supported version 1.
SNMPv2c: Set SNMP trap supported version 2c.
SNMPv3: Set SNMP trap supported version 3.
Trap Community
Indicates the community access string when sending SNMP trap packet. The allowed string length is 0 to
255, and the allowed content is ASCII characters from 33 to 126.
Trap Destination Address
Indicates the SNMP trap destination address.
Trap Destination IPv6 Address
Provide the trap destination IPv6 address of this switch. IPv6 address is in 128-bit records represented as
eight fields of up to four hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It can also represent
a legally valid IPv4 address. For example, '::192.1.2.34'.
Trap Authentication Failure
Indicates that the SNMP entity is permitted to generate authentication failure traps. Possible modes are:
Enable: SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.
Trap Link-up and Link-down