Vidipac VSW7242, User Manual, Page: 185 / 288

185
Feature Command Line
LLDP Parameters
LLDP Timers Syntax:
LLDP Interval [<interval>]
LLDP Hold [<hold>]
LLDP Delay [<delay>]
LLDP Reinit [<reinit>]
Example:
LLDP>interval 30
LLDP>hold 4
LLDP>delay 2
LLDP>reini 2
LLDP Mode
Syntax:
LLDP Mode [<port_list>] [enable|disable|rx|tx]
(rx=RX Only, tx=TX Only)
Example: Enable LLDP on Ports
LLDP>mode 1-10 en (Port 1-10 are enabled)
LLDP>mode 1-26 en (Port 1-26 are enabled)
CDP aware
Syntax:
LLDP cdp_aware [<port_list>] [enable|disable]
Example: Enable CDP on Port 1-5
LLDP>cdp_a 1-5 en (CDP on Port 1-5 are enabled)
LLDP Optional_TLV
Parameters
Syntax:
LLDP optional_TLV [<port_list>]
[port_descr|sys_name|sys_descr|sys_capa|mgmt_addr]
[enable|disable]
Example:
LLDP>option 1-3 port en
LLDP>option 1-3 sys_name en
LLDP>option 1-3 sys_desc en
LLDP>option 1-3 sys_capa en
LLDP>option 1-3 mgmt_add en
5.11 Power over Ethernet Configuration
Feature Command Line
PoE Configuration
PoE Configuration
Syntax:
PoE Mgmt_mode
[class_con|class_res|al_con|al_res|lldp_res|lldp_con]
Parameters:
class_con : Class + Actual Consumption
class_res : Class + Reserved Power
al_con : Allo Actual Consumption
al_res : Allo Reserved Power
lldp_con : LLDP-MED + Actual Consumption
lldp_res : LLDP-MED + Reserved Power
Example:
PoE>mgmt class_con