Vidipac VSW7242, User Manual, Page: 205 / 288

205
User
Indicates the QCL user.
QCE#
Indicates the index of QCE.
Frame Type
Indicates the type of frame to look for incomming frames. Possible frame types are:
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC: Only (LLC) frames are allowed.
SNAP: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames.
Port
Indicates the list of ports configured with the QCE.
Action
Indicates the classification action taken on ingress frame if parameters configured are matched with the
frame's content.
There are three action fields: Class, DPL and DSCP.
Class: Classified QoS class ; if a frame matches the QCE it will be put in the queue.
DPL: Drop Precedence Level ; if a frame matches the QCE then DP level will set to value displayed
under DPL column.
DSCP: If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP
column.
Conflict
Displays Conflict status of QCL entries. As H/W resources are shared by multiple applications. It may
happen that resources required to add a QCE may not be available, in that case it shows conflict status
as 'Yes', otherwise it is always 'No'. Please note that conflict can be resolved by releaseing the H/W
resources required to add QCL entry on pressing 'Resolve Conflict' button.