Vidipac VSW7242, User Manual, Page: 258 / 288

258
Entries in the MLD Group Table are shown on this page. The MLD Group Table is sorted first by VLAN
ID, and then by group.
Navigating the MLD Group Table
Each page shows up to 99 entries from the MLD Group table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD
Group Table. Clicking the Refresh button will update the displayed table starting from that or the next
closest MLD Group Table match. In addition, the two input fields will - upon a Refresh button click -
assume the value of the first displayed entry, allowing for continuous refresh with the same start
address.
The >> will use the last entry of the currently displayed as a basis for the next lookup. When the end is
reached the text "No more entries" is shown in the displayed table. Use the |<< button to start over.
Buttons
Auto - refresh : Check this box to enable an automatic refresh of the page at regular intervals.
Refresh : Refreshes the displayed table starting from the input fields.
|<<: Updates the table starting from the first entry in the MLD Group Table.
>>: Updates the table, starting with the entry after the last entry currently displayed.
MLD SFM Information Table
Entries in the MLD SFM Information Table are shown on this page. The MLD SFM (Souce-Filtered
Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table
is sorted first by VLAN ID, then by group, and then by Port No. Diffrent source addresses belong to the
same group are treated as single entry.