Vidipac VSW7242, User Manual, Page: 171 / 288

171
Type 'up' to move up one level or '/' to go to root level
Security/Switch/SNMP/Trap>
Syntax:
Security Switch SNMP Trap Mode [enable|disable]
Security Switch SNMP Trap Version [1|2c|3]
Security Switch SNMP Trap Community [<community>]
Security Switch SNMP Trap Destination [<ip_addr_string>]
Security Switch SNMP Trap IPv6 Destination [<ipv6_addr>]
Example:
Security/Switch/SNMP/Trap>mode ena
Security/Switch/SNMP/Trap>version 2c
Security/Switch/SNMP/Trap>community public
Security/Switch/SNMP/Trap>destination 192.168.2.100
Result:
Trap Mode : Enabled
Trap Version : 2c
Trap Community : public
Trap Destination : 192.168.2.100
Trap IPv6 Destination : ::
SNMP Trap Event
Setting
Syntax:
Security Switch SNMP Trap Authentication Failure
[enable|disable]
Security Switch SNMP Trap Link-up [enable|disable]
Security Switch SNMP Trap Inform Mode [enable|disable]
Security Switch SNMP Trap Inform Timeout [<timeout>]
Security Switch SNMP Trap Inform Retry Times [<retries>]
Example:
Security/Switch/SNMP>trap auth fai en
Security/Switch/SNMP>trap link-up en
Security/Switch/SNMP>trap info mode en
Security/Switch/SNMP>trap info time 5
Security/Switch/SNMP>trap info ret times 5
Result:
Trap Authentication Failure : Enabled
Trap Link-up and Link-down : Enabled
Trap Inform Mode : Enabled
Trap Inform Timeout (seconds) : 5
Trap Inform Retry Times : 5
SNMPv3 User
Syntax:
Security Switch SNMP User Add <engineid> <user_name>
[MD5|SHA] [<auth_password>] [DES] [<priv_password>]
Example:
Security/Switch/SNMP>user add 800007e5017f000001 orwell
Security/Switch/SNMP>user add 800007e5017f000001 andy
md5 andy123
Result:
SNMPv3 Users Table:
Idx Engine ID User Name Level Auth Priv