Vidipac VSW7242, User Manual, Page: 169 / 288

169
Security Switch Privilege Level Group <group_name>
[<cro>] [<crw>] [<sro>] [<srw>]
(cro=Configuration Read-Only, crw=Configuration/Excute
Read/Write, sro=Status/Statistics Read-Only,
srw=Status/Statistics Read/Write)
Example: Set Privilege level of VLAN Group
Security/Switch/Privilege>level group VLANs 10 10 10 10
(cro=10, crw=10, sro=10, srw=10)
Privilege Level
Configuration Table
Security/Switch>pri level conf
Privilege Level Configuration:
==============================
Privilege Current Level: 15
Group Name Privilege Level
CRO CRW SRO SRW
-------------------------------- --- --- --- ---
Aggregation 5 10 5 10
Debug 15 15 15 15
Diagnostics 5 10 5 10
Authentication
Method
Syntax:
Security Switch Auth Method [console|telnet|ssh|web]
[none|local|radius|] [enable|disable]
Example: Configure Telnet Authentication method to Radius
Enable
Security/Switch>auth method telnet radius en
Authentication
Configuration
Security/Switch>auth conf
Auth Configuration:
===================
Client Authentication Method Local Authentication Fallback
------- ---------------------- -----------------------------
console local Disabled
telnet local Disabled
ssh local Disabled
web local Disabled
SSH
Syntax:
Security Switch SSH Mode [enable|disable]
Example:
Security/Switch>ssh mode en
Security/Switch>ssh mode dis
HTTPS
Syntax:
Security Switch HTTPS Mode [enable|disable]
Security/Switch>https mode en
Security/Switch>https mode dis
Security Switch HTTPS Redirect [enable|disable]
Security/Switch>https mode en (Must enabled HTTPS)