Vidikron VDP-720, Owner'S Operating Manual

Page: 29 / 56

Installation
Vidikron VDP-80-720 Owner’s Operating Manual 19
PRE
L
IMINAR
Y
RGB-HD Connection: Connect your personal computer or DTV decoder with an RGB output
to the VDP-80-720 as shown in Figure 3-3.
Connect the green, red and blue lines to Input 3 (or Input 4) and the horizontal and vertical
sync lines to the Y and C connectors respectively on Input 5 (or Input 6). Use the Y connector
on Input 5 (or 6) for a composite sync signal.
Figure 3-3. RGB Source Connections
1. Some Macintosh computers may require a Macintosh video adapter.
Contact your nearest authorized service center or dealer.
2. This VDP-80-720 may not be able to display images from notebook
computers in simultaneous (external/internal display) mode. Should this
occur, configure the notebook computer to drive the external display
device only. If you are unsure how to do this, refer to your notebook
computer’s user manual.
VDP-80-720
R/G/B to
INPUT 4 H/V to
INPUT 6
R/G/B to
INPUT 3 H/V to
INPUT 5
HD Set Top Box
with RGB Output
Computer
Note