Victory Motorcycles 2005 Vegas, Rider'S Manual

Page: 31 / 106

29
Instruments, Features and Controls
Instrument Cluster
Multi-Function Display
Engine Error Codes
The error screen displays only when the
CHECK ENGINE light is on or when it goes on
and off during one ignition cycle. Error codes
are not stored. When the key is turned OFF, the
code and message is lost, but will reappear if the
fault reoccurs after restarting the engine.
If the CHECK ENGINE indicator lamp
illuminates, retrieve the error codes from the
display.
1. If the error codes are not displayed, use the
mode button to toggle until “Ck ENG”
displays on the main line of the display.
2. Press and hold the mode button to enter the diagnostics code menu.
3. Record the three numbers displayed in the gear position, clock and odometer displays.
4. Press and release the mode button to advance to the next error code.
5. Press and hold the mode button to exit the diagnostics code menu.
6. See an authorized VICTORY dealer for code details and diagnosis.
Low Oil Pressure Display
“LO OIL” displays under the following
conditions.
Condition Indicates Action Required
Engine oil pressure has
dropped while the
engine is running. Oil pressure is below a
safe operating pressure. Stop the engine as soon as safely possible and
check the oil level. If the oil level is sufficient,
but “LO OIL” continues to display after restart-
ing the engine, stop the engine immediately.
Have your dealer check the oil pressure switch.
The key is turned to
ON. The indicator circuit is
operating properly. None - After two seconds the display will return
to the most recently active menu.
The stop/run switch is
moved to STOP. The system is operating
properly. Press and release the MODE button to return
to the most recently active menu.
Suspect Parameter
Number (SPN)
Error Code
Number (0-9)
Failure Mode Indicator (FMI)