Victory Motorcycles 2005 Vegas, Rider'S Manual

Page: 46 / 106

44
Pre-Ride Inspections
Sidestand
1. Straddle the motorcycle and
bring it to the fully upright
position.
2. Move the sidestand upward to
the stored position and
downward to the fully extended
position several times. It should
move smoothly and quietly.
Make sure the return spring
holds the sidestand tightly in place when the sidestand is in the stored position.
3. Replace a bent sidestand immediately. Do not try to straighten a bent sidestand. The
sidestand will be weakened, and may not be able to support the motorcycle.
4. Inspect the sidestand pivot bolt for looseness or wear. Tighten or replace a loose or worn
bolt.
5. Inspect the sidestand rubber pad. Make sure the pad is firmly attached to the sidestand.
Check the wear indicator on the leading edge of the pad. Replace the pad when it’s worn
beyond the wear limit line.
Fasteners
1. Inspect the entire motorcycle chassis and engine for loose, damaged or missing
fasteners. Tighten loose fasteners to the proper torque.
Tip: Refer to the specifications section of this manual or to the VICTORY Service Manual for torque
values.
2. Always replace stripped, damaged or broken fasteners before riding. Use genuine
VICTORY fasteners of equal size and strength.
Wear Limit Line
Front of Motorcycle