55
Maintenance
Drive Belt Tension Inspection
Maintenance
Drive Belt Deflection - with 10 lbs. (4.5 kg) of force
New drive systems (new belt/sprockets)
5 mm +/- 0.5 mm
After 500 miles on drive system
6 mm +/- 0.5 mm
The following data is provided for use with a Sonic Tension Meter.
Follow the instructions provided with the meter.
Required Data
Tension
Span
658.3 mm
All Models
48.3 Hz +/- 1
Belt width
28 mm
Belt mass constant
9.1
Drive Belt Wear Analysis
Internal tooth cracks
(hairline): OK to run, but
monitor condition
External tooth cracks:
Replace belt
Missing teeth:
Replace belt
Chipping (not serious):
OK to run, but monitor
condition
Fuzzy edge cord:
OK to run, but monitor
condition
Hook wear:
Replace belt
Stone damage:
Replace belt if damage is
on edge
Bevel wear (outboard edge
only): OK to run, but
monitor condition
Summary of Contents for 2005 Vegas
