Victory Motorcycles 2005 Vegas, Rider'S Manual

Page: 32 / 106

30
Instruments, Features and Controls
Left Handlebar Controls
Clutch Lever
Pull the lever toward the handlebar
to disengage the clutch. Gradually
release the lever to engage the
clutch. For smooth clutch operation,
pull the lever quickly and release it
gradually.
Tip: A clutch interlock switch prevents
the engine from starting when the
transmission is in gear and the
clutch is engaged. See page 47.
Mode Button
The mode button is located on the front side of the
left handlebar switch. Use the mode button to toggle
through the modes of the multi-function display.
See page 26. Use the mode button to set the display
units to either standard or metric units of
measurement.
Emergency Flasher Switch (Hazard Switch)
Press the top of the switch to activate the emergency flashers. All turn signals will
flash. Press the bottom of the switch to cancel the flashers.
High Beam/Low Beam Light Switch
Press the upper portion of the switch to activate the high beam. Press the lower
portion of the switch to activate the low beam. Press and hold the lower portion of
the switch to activate the momentary passing beam.
Horn Button
To sound the horn, press the horn button.
Turn Signal Switch
Move the turn signal switch to the left to activate the left turn signals. Move the
switch to the right to activate the right turn signals. A signal ends when speed or
distance reach preset levels. To end a signal manually, move the switch to the center
and push it inward.
Momentary Feature: Move the turn signal switch left or right and hold it in that
position. The signal flashes until the switch is released.
Flasher
Switch
High/Low Light Switch
Horn Button
Turn Signal Switch
Clutch Lever
Mode Button