Victaulic VicFlex AH1, Manual

Page: 183 / 239

S 11
Call our toll free number 800-387-9692 or visit www.itwconstruction.ca for general information.
Visit ITW Buildex’s SAMMYS web site www.sammysuperscrew.com for the most current product and technical information.
Construction Products
SAMMYS for Steel – Seismic Restraint
SAMMYS Sidewinders
for Steel - Seismic Restraint
ROD
SIZE
PART
NUMBER
MODEL
MIN
THICKNESS
MAX
THICKNESS
APPLICATION
BOX
QTY
CASE
QTY
INSTALLATION TOOL
3/8" 8054957 SWDR 1-1/2 16 ga. 1/2" Steel Purlin or Bar Joist 25 125
The SWDR 1-1/2 and SWDR 516
must be installed with #14 SW
Red Nut Driver (Part No. 8114910).
No pre-drilling required.
3/8" 8056957 SWDR 516 16 ga. 1/8" Steel Purlin or Bar Joist 25 125
SELECTION CHART
PERFORMANCE TABLES
Maximum Horizontal Loads for
Restraint with l/r=100, 200, 300, and 400
Restraint Shape and Size Nominal Diameter Area (in.
2
)
Least Radius of
Gyration, r (in.)
Maximum Rod Length for l/r (ft)
l/r = 100 l/r = 200 l/r = 300 l/r = 400*
Rods (all thread) 3/8 in. 0.07 0.075 0.6 1.3 1.9 2.5
1/2 in. 0.129 0.101 0.8 1.7 2.5 3.4
Rods (threaded at ends only) 3/8 in. 0.11 0.094 0.8 1.6 2.4 3.1
1/2 in. 0.196 0.125 1.0 2.1 3.1 4.2
Reference: NFPA 13, (2007) * Reference: NFPA 13, (2010)
SWDR 1 - 1/2 AND SWDR 516 FOR 3/8" ROD
Structural attachment for installation of branch/end of line restraint using
3/8" threaded rod. Used primarily in purlin, bar joist, or other steel structural
members. These fastening systems provide a secure and economical attachment
to the structure.
The SWDR 1-1/2
model provides upper structural attachment in a range of steel
thicknesses, from 3/16” through 1/2”. A retaining nut is included with each fastener.
The SWDR 516
model provides upper structural attachment in a range of steel
thicknesses, from 20 ga. through 1/8”. A retaining nut is included with each fastener.
Restrained Pipe Size:
Up to Schedule 40 pipe 2” or less
Max Length of
Restraint Material:
See Maximum Horizontal Load Tables below.
Maximum Angle: 45° from horizontal
Material: Carbon Steel
Screw Description: (SWDR 1-1/2): 12-24 X 1-1/2” Teks® 5
(SWDR 516): 5/16”-18 X 1-1/4” Teks® 3
Finish (both): Electro-Zinc (cap) Silver Climaseal® (screw)
Testing: BX Report # R-1362
Listing: UL 203 as a pipe hanger
UL 203A pending
SPECIFICATIONS
DESCRIPTION  SIDEWINDER 