Victaulic VicFlex AH1, Manual

Page: 42 / 239

®
MSDS No.: 259
Revision No.: 010
Revision Date: 08/17/04
Page: 1 of 2
HILTI ® is a registered trademark of Hilti Corp.
MATERIAL SAFETY DATA SHEET
Product name: FS-ONE High Performance Intumescent Firestop Sealant
Description: One-part acrylic-based sealant
Supplier: Hilti, Inc. P.O. Box 21148, Tulsa, OK 74121
Emergency # (Chem-Trec.): 1 800 424 9300 (USA, PR, Virgin Islands, Canada); 001 703 527 3887 (other countries)
INGREDIENTS AND EXPOSURE LIMITS
Ingredients: CAS Number: PEL: TLV: STEL:
Polyacrylate dispersion Mixture NE NE NE
Calcium carbonate 001317-65-3 5 mg/m
3
(T) 10 mg/m
3
(T) NE
Zinc borate 138265-88-0 NE NE NE
Ammonium polyphosphate 068333-79-9 NE NE NE
Talc 014807-96-6 20 mppcf 2 mg/m
3
NE
Expandable graphite 012777-87-6 5 mg/m
3
(T) 2 mg/m
3
(T) NE
Ethylene glycol 000107-21-1 NE C:100 mg/m
3
(A) NE
Polybutene 009003-29-6 NE NE NE
Iron oxide 001309-37-1 10 mg/m
3
5 mg/m
3
NE
Glass filament 065997-17-3 NE 5 mg/m
3
(T) NE
Silicon dioxide 014808-60-7 0.05 mg/m
3
(T) 0.1 mg/m
3
(T) NE
Water 007732-18-5 NE NE NE
Abbreviations: PEL = OSHA Permissible Exposure Limit. TLV = ACGIH Threshold Limit Value. C = Ceiling. STEL = Short Term
Exposure Limit. NE = None Established. NA = Not Applicable. (T) indicates “as total dust”. (R) indicates “as respirable fraction”. (A)
indicates “as an aerosol”. mppcf = million particles per cubic foot.
PHYSICAL DATA
Appearance: Red paste. Odor: Odorless.
Vapor Density: (air = 1) Not determined. Vapor Pressure: 23mbar @ 20C / 68F
Boiling Point:
Not applicable.
VOC Content:
75.0 g/L.
Evaporation Rate:
Not applicable.
Solubility in Water:
Soluble.
Specific Gravity: 1.5 pH: Not determined.
FIRE AND EXPLOSION HAZARD DATA
Flash Point: Non-flammable. Flammable Limits: Not applicable.
Extinguishing Media: Not applicable. Use extinguishing media as appropriate for surrounding fire.
Special Fire Fighting
Procedures:
None known. Use a self-contained breathing apparatus when fighting fires involving chemicals.
Unusual Fire and Explosion
Hazards: None known. Thermal decomposition products can be formed such as oxides of carbon, sulfur
and phosphorous.
REACTIVITY DATA
Stability: Stable. Hazardous Polymerization: Will not occur.
Incompatibility:
Strong acids, peroxides, and oxidizing agents.
Decomposition Products: Thermal decomposition can yield CO and CO
2
.
Conditions to Avoid: None known.
HEALTH HAZARD DATA
Known Hazards: None known.
Signs and Symptoms of
Exposure:
Possibly irritating upon contact with the eyes or upon repeated contact with the skin.
Medical Conditions
Aggravated by Exposure: Eye and skin conditions.
Routes of Exposure: Dermal.
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com