Victaulic VicFlex AH1, Manual

Page: 167 / 239

FP-4.12
PROJECT INFORMATION APPROVAL STAMP
Project:
q Approved
Address:
q Approved as noted
Contractor:
q
Not approved
Engineer: Remarks:
Submittal Date:
Notes 1:
Notes 2:
SE-1 are short pattern products and are specifically designed for
use in Fire Protection applications where economy is a factor. All
products are is UL/ULC Listed, LPCB, VdS and FM Approved.
Maximum working pressure for these products is 300 PSI. For
the latest UL/ULC listed, LPCB, VdS and FM Approved pressure
ratings versus pipe schedule, see www.anvilintl.com or contact
your local Anvil Representative.
MATERIAL SPECIFICATIONS
CAST FITTINGS:
Ductile Iron conforming to ASTM A-536, Grade 65-45-12
COATINGS:
q
Rust inhibiting paint Color: ORANGE (standard) or
q
Hot Dipped Zinc Galvanized conforming to ASTM A-153 (optional)
q
Other available options: Example: RAL3000 or RAL9000 Series
SE-1 90˚ ELBOW
Nominal
Size
O.D.
Center
to End
Approx.
Wt. Ea.
In./DN(mm) In./mm In./mm Lbs./Kg
2 2.375 2
3
⁄
4
1.5
50 60.3 70 0.7
2
1
⁄
2
2.875 3 2.1
65 73.0 76 1.0
3 3.500 3
3
⁄
8
3.6
80 88.9 86 1.6
4 4.500 4 5.8
100 114.3 102 2.6
6 6.625 5
1
⁄
2
11.8
150 168.3 140 5.3
8 8.625 6
7
⁄
8
21.1
200 219.1 175 9.6
SE-1 90˚ ELBOW ShORT PATTERN FITTING –
PRESSuRE dROP
18
16
14
12
10
8
6
4
2
0
5 10 15 20
Flow Rate (ft./sec.)
Pressure Drop
(ft. of Schedule 40 pipe)
8 inch
6 inch
4 inch
3 inch
2
1
/
2
inch
2 inch
SPF™ short pattern fittings exceed the headloss requirements of NFPA 13.
For Fig. SE-1 90˚ grooved end elbows use the value shown.
Note: Above values are shown for Schedule 40 pipe to be consistent with industry practices.
Additional sizes available, contact an Anvil Representative.
C to E
O.D.
FIG. SE-1
Short Pattern 90˚ Elbow
For Listings/Approval Details and Limitations, visit our website at
www.anvilintl.com or contact an Anvil
®
Sales Representative.
VdS