ALE-NC series operation manual Appendix
－
89
－
6
Register the user password.
Refer to “8-5-2(2) User password registration”.
(1) The user password of which selected in Step 3 is registered.
(2) When “0: Guest user” is selected at step 3, skip this step.
7
Set the functions and setting values which are intended to be fixed.
Refer to “3 Functions related to the operation”, “4 Functions related to the performance” “5
Comparator setting”, “6 External input/output functions” and “8 Controlling and adjustment
functions” to set functions/setting values to be fixed.
<5 LOCK> and <6 ADMIN/ADJUST> are displayed only for the administrator.
When to authorize each user to operate “Span adjustment with external weight”,
“Adding function”, etc., please assign the functions to <<F1>>-<<F6>> (Free key).
(Refer to “8-3 Free key settings”.)
8
Set the user’s authority (Lock setting).
Refer to “7 Functions related to the lock” to set user’s authority for key operation and/or
accessing to setting menus.
Appendix 6-2
User/guest login
1
Power on the balance and go to the
User login mode.
“Self-check”
Press [On/Off] key, then the balance shifts to
User login mode after start-up operation.
<
> is indicated on the 7-segment
display.
2
Select the user number.
Select the user (operator) number:
<<0>>
:
Guest user
<<1>>
:
User 1
<<2>>
:
User 2
<<ADMIN>>
:
Shift to the Administrator login
mode
3
Input the user password.
Input the user password by pressing
[F1]-[F4] keys.
Each digit increment as “0, 1, …, 8, 9, 0” by
pressing each [F] key.
First digit from the left
:
[F1] key
Second digit from the left
:
[F2] key
Third digit from the left
:
[F3] key
Fourth digit from the left
:
[F4] key
4
Start up the balance.
Press [Output] key.
When the password is authenticated, the balance
starts up.
5
Use the balance with the user’s/guest’s authority.
Lock setting configured by administrator is reflected.
When “0: Guest user” is selected at step 2, step 3 and 4 are skipped.
